Download Article

Download Article

Do you have a skein of yarn that has morphed into an unrecognizable mass? Perhaps you have some "colored spaghetti" hanging out in your project room or box? Or maybe you've just come across your toddler or pet playing in your knitting bag? Whatever the knitting crisis you are facing, you can tidy up that mess in no time the old-fashioned way.

  1. 1

    Gently untangle as much yarn as you can.

  2. 2

    Loosen any knotted areas but be careful not to pull it into two pieces.

    Advertisement

  3. 3

    Find one end of the yarn.

  4. 4

    Lightly wrap the end of the yarn around your fingers.

  5. 5

    Remove the wrapped loops and hold them in one hand.

  6. 6

    Wrap the remaining yarn around the loops until no more will comfortably fit.

  7. 7

    Pinch the "football" shape you have created between your thumb and forefinger of one hand.

  8. 8

    Wrap the yarn lengthwise around the "football", flattening it into a rounder shape by pulling snugly as you go.

  9. 9

    Change directions of your wrap every 15 to 20 rounds. There is no "right" direction. Just wrap until it's rounded.

  10. 10

    Continue until all of the yarn mass is wrapped into an easy to manage yarn ball!

  11. Advertisement

  1. 1

    Use your fingers again. When you wrap the yarn in the beginning, wrap it around your pinky finger and your thumb in a figure eight, making sure the loose end doesn't get caught up in it.

  2. 2

    Pinch the figure eight in the center and pull it off of your fingers.

  3. 3

    Wrap the remaining yarn around the center of the figure eight. Again, be sure that loose end is free.

  4. 4

    Continue wrapping around the figure eight until you have a ball. See the video below for visuals.

  5. 5

    Finished.

  6. Advertisement

  1. 1

    Take a square of cardboard and cut a notch in it.

  2. 2

    Tie one end of the yarn around the cardboard square.

  3. 3

    Wrap the yarn around the square. This will start to form a small ball with more wraps.

    • Roll the yarn reasonably tightly.
  4. 4

    Switch the side you are wrapping every few minutes. Go for a cross pattern. As the ball grows, this enhances the stability and prevents it from tangling.

  5. 5

    Keep wrapping until all of the yarn is used up. Eventually, you will have a neat ball.

  6. 6

    Finish up. To end it, take the last strand and tuck it under another one

  7. Advertisement

  1. 1

    Put the skein or hank on a swift. If you don't have one, then put it on a chair. First untwist the hank, then put it on the swift, and adjust the swift to make it the same size as the hank.

  2. 2

    Use an end of the skein and put it through the piece of metal that looks like a coil.

  3. 3

    Pull part of the yarn through the coil and put it into the notch in the yarn baller.

  4. 4

    Turn the crank clockwise while holding the yarn taught.

  5. 5

    Pull the yarn off the winder. Now you're done!

  6. Advertisement

Add New Question

  • Question

    Which one is easier?

    Anotheronebitesthesoil

    Anotheronebitesthesoil

    Community Answer

    Different methods work better for different people. Try all the methods and select the one that works for you.

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

Video

  • The tension or stretchiness of the yarn and your projects, depends on how loose or tight you wrap your ball of yarn. If the yarn is wrapped too tightly, it loses all of its give. Then your project can be tight and rough feeling, as opposed to soft, with some cushion to it. Wrap too loosely, and the ball can fall apart.

  • Keep the yarn ball in a bowl or plastic bag to keep it from rolling across the floor as you knit or crochet with it.

  • Every time you cut your yarn, it will make a loose end that will have to be firmly secured, not just to the ball of yarn but to your project. There is nothing worse than a loose end to undo all of your beautiful work.

  • If you reach a badly knotted area, just cut the yarn and begin again.

  • Always loosen knots; do not pull hard enough to make a knot if you can help it. The looser the mess, the easier it is to wrap.

  • Try not to make a large "band" of yarn while wrapping, these slip off the ball easily. Try to change direction often to prevent this.

  • You should insert a finger or two between the ball and the new "windings" removing them as you turn the ball to wind in a different area. This will keep they yarn from being wound too tightly and stretched out.

Thanks for submitting a tip for review!

Advertisement

Things You'll Need

  • A bunch of yarn (probably somewhat tangled)
  • Scissors (optional)
  • A small square of cardboard (for Method 3)

About This Article

Thanks to all authors for creating a page that has been read 330,361 times.

Reader Success Stories

  • Lillian Darnell

    Lillian Darnell

    Aug 22, 2016

    "This method helped a lot last summer. For those who are wanting to learn how to wind a yarn ball, this is for you...." more

Did this article help you?